Imagine you are going for a long drive with your loved ones, and suddenly your car gets some unexpected crash and get some dents on! Those minor dents in your car are genuinely frustrating. So, many car owners are resorting to car dent pullers to try and repair the damage themselves.
A dent removal kit pulls dents from the outside of the car, unlike paintless dent removal techniques, which push dents out from the inside. Now, you might be wondering if these car dent pullers really work. While it is always advisable to go to professionals to mend your car, you can sometimes take the help of car dent pullers and do the job yourself.
What is a Car Dent Puller?
So, now you may raise the question “What is a car dent puller“? This basically lifts dents out of car bodywork and straighten the metal out. Do you know that there are two types of dent pullers? These are Suction Dent Pullers and Glue Kits Dent Pullers.
- Suction dent pullers are like plungers. You can attach them to the dent and pull them up towards you to remove the dent.
- Glue dent puller kits basically consists of gluing a flat pulling tab onto the dent directly. The pulling tab contains a pin function, so you turn the grip to pull the tab up and away from your automobile.
Other tools hooked the dragging tab to a pole. Then you slide a weight along the pole, like a bicycle pump, to provide the upward force.
Please note: It is not advisable to use any dent puller kit that should get you to have drilling holes into the dent. Also, it might be a possibility that you are a novice. In that case, always contact professional repairing companies.
Can I Use Car Dent Pullers to My Advantage?
Dent pullers only work on surface dents that are placed on a flat, mainly on the flexible surface. They can enhance the appearance of car dents but are unlikely to create a perfect finish.
Unfortunately, DIY dent pullers will not work on in-depth, angular dents or damage along the edges of bodywork. There you can go for some panel beater in Melbourne! But, dents in areas of dense metal are extremely hard to remove at home.
Pros of Dent Pullers
- As a matter of fact, your money could be saved by these DIY dent-pulling kits.
- In fact, while your car is being repaired, you just don’t have to be without your car.
- And the best part is that you can now control your own repair.
Cons of Dent Pullers
- Don’t try to achieve a perfect professional finish, because you can’t.
- Honestly, it is comfortable to make the damage more threatening, which would then need a costlier repair.
- And don’t forget that you cannot use a dent puller on an area that also has paintwork damage, as this will worsen the damage.
The Right Way to Use a Car Dent Puller
It is necessary to obey the instructions that arrive with your car dent puller kit. Keep in mind that some car dents may take several tries to pull the damage out. Don’t panic! Instead, you can also go for some panel beater in Melbourne.
Don’t forget the first step, which is to clean the surface of the car entirely in order to remove any dirt and oil.
What you need to do is to simply dry the damaged area as this will allow the car dent puller to stick to the metal.
Suction Dent Pullers
- Moisten the suction surface with a small amount of water and attach it to the puller of the car.
- For small dents, attach the puller to the centre of the dent.
- But, for extensive dents, start pulling at the edges and operate your way towards the middle.
- Once the puller is tightly connected to the car, start pulling it straight up.
- Use quick and small pulses and not just one big tug.
Glue Dent Pullers
- Firstly, Select the pulling tab that nicely fits the size of the dent.
- Secondly, you need to warm up the glue gun and use a clot to the base of the pulling tab.
- Fix the tab to the dent, but that should not be pressed too hard. There must be a coating of glue between the tab and the metal.
- You just need to let the glue set for several minutes or until hard.
- Attach the pulling tool over the pulling tab and begin pulling the tab away from the car. Be sure to use short, quick movements.
Final Thoughts
In my opinion, opting for expert professional service when it comes to any form of car maintenance and repair is a wise decision. You may also go for some panel beater in Melbourne if needed.
Or if your car has some minor problems, then you may consider a car dent puller on your own. So, why are you waiting? Go for it, have an emergency car dent puller in your kit!